Guide
3000W Handheld Laser Welding and the 4-in-1 Welding System: What's Inside
Inside the 3000W handheld fiber welder and the FWH20-S10C 4-in-1 system — welding, cutting, seam cleaning and remote cleaning in one handheld unit, with a 7-inch HMI and Bluetooth monitoring.

Quick Answer: The 3000W handheld welder delivers high-power continuous laser for thicker plates and bigger jobs. Paired with the FWH20-S10C 4-in-1 swing welding head, one handheld unit can weld, cut, clean seams and clean surfaces at a distance, controlled through a 7-inch touchscreen with Bluetooth app monitoring. 1. 3000W Handheld Welder Basics The welder provides 3000W continuous laser power, adjustable from 0 to 100%. A 10 m optical fiber delivers the beam to the handheld head, the system is water-cooled, and it accepts single-phase 220V or three-phase 380V supply. It handles stainless steel, aluminum, carbon steel, copper-plated sheets and most common metals. 2. The 4-in-1 Welding Head (FWH20-S10C) The FWH20-S10C swing head is rated up to 3000W at 1070 nm with a QBH interface. It combines welding, cutting, seam cleaning and remote cleaning in one unit. Seam cleaning width reaches 12 mm, and cleaning optics can be switched between 110 mm and 150 mm focus versions. The auto-swing function smooths the bead; spot diameter adjusts from 0 to 5 mm, focus adjusts from -10 to +10 mm, and assist gas pressure is up to 1 MPa. 3. Control and Monitoring A 7-inch TFT touchscreen runs the welding system interface. For safety, the laser only fires when a metal clamp is attached to the workpiece and the nozzle touches the part — a double contact interlock. The system supports Bluetooth app monitoring for convenient status checks. 4. Daily Use Notes Use distilled or pure water for cooling and replace it about every five months; add antifreeze in winter. Use argon, nitrogen or filtered compressed air as shielding gas. Keep the optics clean and let the system cool between long runs. FAQ Q: What can the 4-in-1 head do besides welding? A: It switches between welding, cutting, seam cleaning and remote cleaning, so one head covers prep, weld and cleanup steps. Q: How does the safety interlock work? A: The laser only emits when both the metal clamp is on the workpiece and the nozzle touches the part, preventing accidental firing. Q: What cooling water should I use? A: Distilled or pure water, replaced about every five months; use antifreeze in cold environments.
