GUIDES & RESOURCES
Make an informed laser equipment decision.
Practical selection questions, configuration trade-offs and information to prepare before requesting a quotation.
Guide
Wobble frequency, spot width and travel speed decide whether a handheld laser weld repeats. How to read the LY-1000 and LY-1500 process chart, and which three variables move a weld away from it.
Read guide →Guide
No grit, no solvent, and still a maintenance routine. What to check every shift on a 300 W pulsed cleaning machine, and why the lens and the cooling loop decide the result long before the source does.
Read guide →Guide
A grounded look at what a 300 W pulsed laser cleaning machine replaces on the shop floor, and which four settings the operator actually controls instead of grit size and bath concentration.
Read guide →Guide
Full specifications of the 3000W handheld fiber welder and the FWH20-S10C swing head — welding, cutting, seam cleaning and remote cleaning in one unit, with a 7-inch HMI, double contact interlock and Bluetooth app.
Read guide →Guide
How the LY-1000/1500 handheld laser welder is built and set up: fiber delivery, swing head, process table for stainless, carbon steel, galvanized and aluminum, plus the double interlock.
Read guide →Guide
A specification-level look at the LY-FLC300M 300W pulse laser cleaner: pulse parameters, eight scan modes, field lens options and where the machine is used.
Read guide →Guide
Inside the 3000W handheld fiber welder and the FWH20-S10C 4-in-1 system — welding, cutting, seam cleaning and remote cleaning in one handheld unit, with a 7-inch HMI and Bluetooth monitoring.
Read guide →Guide
How the LY-1000/1500 handheld laser welder works — fiber delivery, swing welding head, safety interlocks, gas selection and recommended process parameters.
Read guide →Guide
An overview of the LY-FLC300M 300W pulse laser cleaner — cleaning principle, scan patterns, applications and package contents.
Read guide →Buying guide
Compare source, supply voltage, cooling, wire feeding and site requirements together.
Read guide →Configuration guide
Field lens selection is about part coverage, energy density and positioning—not just a larger number.
Read guide →Selection guide
Start with the material and the required result before comparing power ratings.
Read guide →