Guide

Handheld Laser Welding Machine LY-1000/1500: Features, Process and Applications

How the LY-1000/1500 handheld laser welder works — fiber delivery, swing welding head, safety interlocks, gas selection and recommended process parameters.

Handheld Laser Welding Machine LY-1000/1500: Features, Process and Applications

Quick Answer: The LY-1000/1500 is a handheld fiber laser welding machine with 1000W or 1500W average power. It delivers the beam through an optical fiber with a QBH interface, uses a swing welding head for wider, smoother beads, and includes dual safety interlocks plus a built-in process library. 1. Machine and Optics The machine provides 1000W or 1500W continuous output with power stability better than 2% and a maximum modulation frequency of 20 kHz. The fiber is 7 m or 10 m long, the system is water-cooled and rated for 24-hour continuous work. The QBH interface accepts a swing welding head with swing frequency from 0 to 100 Hz, spot diameter 0-6 mm and focus lengths of 120 or 150 mm. 2. Safety and Control Safety starts with a double interlock: the touchscreen start plus a mechanical button, protected by a safety circuit. The control system stores up to 16 process numbers and a process library, and the interface can switch languages. The same platform supports welding, cutting, seam cleaning and remote cleaning. 3. Process Recommendations For stainless steel, the guide suggests wire feed speeds around 90 cm/min with 1.0 mm wire for 1 mm plate, 75 cm/min with 1.2 mm wire for 2 mm plate, and 60 cm/min with 1.6 mm wire for 3 mm plate, using nitrogen or argon shielding. Carbon steel uses a mixed gas, while aluminum is welded with nitrogen. Confirm settings with a test piece before production runs. 4. Applications The welder is used in kitchenware manufacturing, window and glass railing work, stair and elevator construction, stainless steel furniture, sheet metal parts, advertising design, craft gifts, auto repair, industrial manufacturing, rail transit and aerospace. FAQ Q: Which gas should I use? A: Nitrogen or argon for stainless steel, mixed gas for carbon steel, and nitrogen for aluminum. The air supply can also use compressed air with proper filtering for some jobs. Q: How do I avoid burn-through on thin sheets? A: Start with a lower power setting and confirm on a test piece; the swing head and adjustable spot diameter help spread the heat on thin material. Q: Can the machine run continuously? A: Yes. The system is water-cooled and designed for 24-hour continuous work with a laser pump lifetime over 100,000 hours.