GUIAS E RECURSOS
Escolha seu equipamento a laser com segurança.
Orientações práticas de seleção, comparações de configuração e informações para preparar sua solicitação de proposta.
Guia
Wobble frequency, spot width and travel speed decide whether a handheld laser weld repeats. How to read the LY-1000 and LY-1500 process chart, and which three variables move a weld away from it.
Ler guia →Guia
No grit, no solvent, and still a maintenance routine. What to check every shift on a 300 W pulsed cleaning machine, and why the lens and the cooling loop decide the result long before the source does.
Ler guia →Guia
A grounded look at what a 300 W pulsed laser cleaning machine replaces on the shop floor, and which four settings the operator actually controls instead of grit size and bath concentration.
Ler guia →Guia
Full specifications of the 3000W handheld fiber welder and the FWH20-S10C swing head — welding, cutting, seam cleaning and remote cleaning in one unit, with a 7-inch HMI, double contact interlock and Bluetooth app.
Ler guia →Guia
How the LY-1000/1500 handheld laser welder is built and set up: fiber delivery, swing head, process table for stainless, carbon steel, galvanized and aluminum, plus the double interlock.
Ler guia →Guia
A specification-level look at the LY-FLC300M 300W pulse laser cleaner: pulse parameters, eight scan modes, field lens options and where the machine is used.
Ler guia →Guia
Inside the 3000W handheld fiber welder and the FWH20-S10C 4-in-1 system — welding, cutting, seam cleaning and remote cleaning in one handheld unit, with a 7-inch HMI and Bluetooth monitoring.
Ler guia →Guia
How the LY-1000/1500 handheld laser welder works — fiber delivery, swing welding head, safety interlocks, gas selection and recommended process parameters.
Ler guia →Guia
An overview of the LY-FLC300M 300W pulse laser cleaner — cleaning principle, scan patterns, applications and package contents.
Ler guia →Guia de compra
Compare fonte, tensão, refrigeração, alimentação de arame e requisitos do local em conjunto.
Ler guia →Guia de configuração
A escolha da lente envolve cobertura da peça, densidade de energia e posicionamento — não apenas uma área maior.
Ler guia →Guia de seleção
Comece pelo material e pelo resultado desejado antes de comparar as potências.
Ler guia →